// xestiaab_contactload.h - Xestia Address Book Contact Load Unit Tests.
//
-// (c) 2012-2015 Xestia Software Development.
+// (c) 2012-2017 Xestia Software Development.
//
// This file is part of Xestia Address Book.
//
// with Xestia Address Book. If not, see <http://www.gnu.org/licenses/>
#include <gtest/gtest.h>
-#include "../contacteditor/ContactDataObject.h"
+#include "../contacteditor/cdo/ContactDataObject.h"
-TEST(ContactLoad, ContactLoadTests){
+TEST(ContactLoad, GivenContactDataObjectWhenLoadFileIsCalledWithMissingFileThenReturnFileMissingError)
+{
- ContactDataObject TestFile;
+ // Given
- // Check that the file given is not missing.
+ ContactDataObject testFile;
- ASSERT_EQ(CONTACTLOAD_FILEMISSING, TestFile.LoadFile("MissingFile.vcf"));
+ // When
+
+ ContactLoadStatus testFileLoadStatus = CONTACTLOAD_UNITTESTFAIL;
+ testFile.LoadFile("MissingFile.vcf");
- // Check that the file given does not have an error when attempting to
- // open it.
+ // Then
+
+ ASSERT_EQ(CONTACTLOAD_FILEMISSING, testFileLoadStatus);
+
+}
+
+TEST(ContactLoad, GivenContactDataObjectWhenLoadFileIsCalledWithInvalidPermissionsSetThenReturnInvalidPermissionsError)
+{
+
+ // Given
+
+ ContactDataObject testFile;
+
+ // When
+
+ ContactLoadStatus testFileLoadStatus = CONTACTLOAD_UNITTESTFAIL;
+ testFileLoadStatus = testFile.LoadFile("InvalidPermissions.vcf");
+
+ // Then
+
+ ASSERT_EQ(CONTACTLOAD_FILEERROR, testFileLoadStatus);
+
+}
+
+TEST(ContactLoad, GivenContactDataObjectWhenLoadFileIsCalledWithInvalidFormatThenReturnInvalidFormatError)
+{
+
+ // Given
+
+ ContactDataObject testFile;
+
+ // When
+
+ ContactLoadStatus testFileLoadStatus = CONTACTLOAD_UNITTESTFAIL;
+ testFileLoadStatus = testFile.LoadFile("LoadCheck-Load1-v3.vcf");
+
+ // Then
+
+ ASSERT_EQ(CONTACTLOAD_FILEINVALIDFORMAT, testFileLoadStatus);
+
+}
+
+TEST(ContactLoad, GivenContactDataObjectWhenLoadFileIsCalledWithNonMeetingBaseSpecificationThenReturnFileBaseSpecificationError)
+{
+
+ // Given
+
+ ContactDataObject testFile;
+
+ // When
- ASSERT_EQ(CONTACTLOAD_FILEERROR, TestFile.LoadFile("InvalidPermissions.vcf"));
+ ContactLoadStatus testFileLoadStatus = CONTACTLOAD_UNITTESTFAIL;
+ testFileLoadStatus = testFile.LoadFile("LoadCheck-Load3.vcf");
+
+ // Then
+
+ ASSERT_EQ(CONTACTLOAD_FILEBASESPECFAIL, testFileLoadStatus);
+
+}
+
+TEST(ContactLoad, GivenContactDataObjectWhenLoadFileIsCalledThenContactLoadedOK)
+{
+
+ // Given
+
+ ContactDataObject testFile;
- // Check that the file is a valid vCard 4.0 file.
+ // When
+
+ ContactLoadStatus testFileLoadStatus = CONTACTLOAD_UNITTESTFAIL;
+ testFileLoadStatus = testFile.LoadFile("LoadCheck-Load4.vcf");
- ASSERT_EQ(CONTACTLOAD_FILEINVALIDFORMAT, TestFile.LoadFile("LoadCheck-Load1-v3.vcf"));
+ // Then
- // Check that the vCard 4.0 file meets the base specification.
+ ASSERT_EQ(CONTACTLOAD_OK, testFileLoadStatus);
+
+}
+
+TEST(ContactLoad, ContactLoadTests){
+
+ ContactDataObject TestFile;
- ASSERT_EQ(CONTACTLOAD_FILEBASESPECFAIL, TestFile.LoadFile("LoadCheck-Load3.vcf"));
+ // Check that the file given does not have an error when attempting to
+ // open it.
// Check that the vCard 4.0 file loads OK.
}
+TEST(ContactLoad, ClientPIDMapTests){
+
+ ContactDataObject TestFile;
+
+ ASSERT_EQ(CONTACTLOAD_OK, TestFile.LoadFile("LoadCheck-Load4.vcf"));
+
+ std::map<int,wxString>::iterator TestFileIter;
+
+ // Test the first Client PID Map.
+
+ TestFileIter = TestFile.ClientPIDList.find(0);
+ ASSERT_NE(TestFile.ClientPIDList.end(), TestFileIter);
+ ASSERT_EQ("1;urn;uuid:aaaaaaaaa-aaaa-aaaa-aaaa-aaaaaaaaaaaa", TestFileIter->second);
+
+ TestFileIter = TestFile.ClientPIDListTokens.find(0);
+ ASSERT_EQ(TestFile.ClientPIDListTokens.end(), TestFileIter);
+
+ // Test the second Client PID Map.
+
+ TestFileIter = TestFile.ClientPIDList.find(1);
+ ASSERT_NE(TestFile.ClientPIDList.end(), TestFileIter);
+ ASSERT_EQ("2;urn;uuid:ccccccccc-cccc-cccc-cccc-cccccccccccc", TestFileIter->second);
+
+ TestFileIter = TestFile.ClientPIDListTokens.find(1);
+ ASSERT_EQ(TestFile.ClientPIDListTokens.end(), TestFileIter);
+
+ // Test the third Client PID Map.
+
+ TestFileIter = TestFile.ClientPIDListTokens.find(2);
+ ASSERT_NE(TestFile.ClientPIDListTokens.end(), TestFileIter);
+ ASSERT_EQ("MEEP=MOO;WOOP=WOO", TestFileIter->second);
+
+ TestFileIter = TestFile.ClientPIDList.find(2);
+ ASSERT_NE(TestFile.ClientPIDList.end(), TestFileIter);
+ ASSERT_EQ("3;urn;uuid:bbbbbbbbb-bbbb-bbbb-bbbb-bbbbbbbbbbbb", TestFileIter->second);
+
+}
+
+TEST(ContactLoad, RevisionTests){
+
+ ContactDataObject TestFile;
+
+ ASSERT_EQ(CONTACTLOAD_OK, TestFile.LoadFile("LoadCheck-Load4.vcf"));
+
+ ASSERT_EQ("20151227T033000Z", TestFile.Revision);
+ ASSERT_EQ("TEST=YES;DATA=NO;MORE=MAYBE", TestFile.RevisionTokens);
+
+}
+
TEST(ContactLoad, SourceTests){
ContactDataObject TestFile;
}
+TEST(ContactLoad, XMLTest){
+
+ ContactDataObject TestFile;
+
+ // Check that the vCard 4.0 file loads OK.
+
+ ASSERT_EQ(CONTACTLOAD_OK, TestFile.LoadFile("LoadCheck-Load4.vcf"));
+
+ std::map<int,wxString>::iterator TestFileIter;
+ std::map<int,int>::iterator TestFileIntIter;
+
+ // Start with the first XML property.
+
+ // Start with a general source address.
+
+ TestFileIter = TestFile.XMLList.find(0);
+ ASSERT_NE(TestFile.XMLList.end(), TestFileIter);
+ ASSERT_EQ("<a xmlns=\"http://www.w3.org/1999/xhtml\"\\n"
+ " href=\"http://example.com/\">Example Page 1</a>", TestFileIter->second);
+
+ TestFileIter = TestFile.XMLList.find(1);
+ ASSERT_NE(TestFile.XMLList.end(), TestFileIter);
+ ASSERT_EQ("<a xmlns=\"http://www.w3.org/1999/xhtml\"\\n"
+ " href=\"http://example.com/page2.html\">Example Page 2</a>", TestFileIter->second);
+
+ TestFileIter = TestFile.XMLList.find(2);
+ ASSERT_NE(TestFile.XMLList.end(), TestFileIter);
+ ASSERT_EQ("<a xmlns=\"http://www.w3.org/1999/xhtml\"\\n"
+ " href=\"http://example.com/page3.html\">Example Page 3</a>", TestFileIter->second);
+
+}
+
TEST(ContactLoad, NicknameTests){
ContactDataObject TestFile;
TestFileIter = TestFile.GeneralAddressListGeo.find(0);
ASSERT_NE(TestFile.GeneralAddressListGeo.end(), TestFileIter);
- ASSERT_EQ("\"geo:1.0, 1.0\"", TestFileIter->second);
+ ASSERT_EQ("geo:1.0, 1.0", TestFileIter->second);
// Check the TZ section.
TestFileIter = TestFile.HomeAddressListGeo.find(1);
ASSERT_NE(TestFile.HomeAddressListGeo.end(), TestFileIter);
- ASSERT_EQ("\"geo:4.0, 4.0\"", TestFileIter->second);
+ ASSERT_EQ("geo:4.0, 4.0", TestFileIter->second);
// Check the TZ section.
TestFileIter = TestFile.BusinessAddressListGeo.find(2);
ASSERT_NE(TestFile.BusinessAddressListGeo.end(), TestFileIter);
- ASSERT_EQ("\"geo:7.0, 7.0\"", TestFileIter->second);
+ ASSERT_EQ("geo:7.0, 7.0", TestFileIter->second);
// Check the TZ section.
TestFileIter = TestFile.GeneralTelephoneList.find(0);
ASSERT_NE(TestFile.GeneralTelephoneList.end(), TestFileIter);
- ASSERT_EQ("tel:00000000", TestFileIter->second);
+ ASSERT_EQ("00000000", TestFileIter->second);
+
+ // Check the data type section.
+
+ TestFileIter = TestFile.GeneralTelephoneListDataType.find(0);
+ ASSERT_NE(TestFile.GeneralTelephoneListDataType.end(), TestFileIter);
+ ASSERT_EQ("tel", TestFileIter->second);
// Check the type section.
TestFileIter = TestFile.GeneralTelephoneListTypeInfo.find(0);
ASSERT_NE(TestFile.GeneralTelephoneListTypeInfo.end(), TestFileIter);
- ASSERT_EQ("fax,mobile", TestFileIter->second);
+ ASSERT_EQ("fax,cell", TestFileIter->second.ToStdString());
// Check the ALTID section.
TestFileIter = TestFile.HomeTelephoneList.find(1);
ASSERT_NE(TestFile.HomeTelephoneList.end(), TestFileIter);
- ASSERT_EQ("tel:00001111", TestFileIter->second);
+ ASSERT_EQ("00001111", TestFileIter->second);
+
+ // Check the data type section.
+
+ TestFileIter = TestFile.HomeTelephoneListDataType.find(1);
+ ASSERT_NE(TestFile.HomeTelephoneListDataType.end(), TestFileIter);
+ ASSERT_EQ("tel", TestFileIter->second);
// Check the type section.
TestFileIter = TestFile.BusinessTelephoneList.find(2);
ASSERT_NE(TestFile.BusinessTelephoneList.end(), TestFileIter);
- ASSERT_EQ("tel:22221111", TestFileIter->second);
+ ASSERT_EQ("22221111", TestFileIter->second);
+
+ // Check the data type section.
+
+ TestFileIter = TestFile.BusinessTelephoneListDataType.find(2);
+ ASSERT_NE(TestFile.BusinessTelephoneListDataType.end(), TestFileIter);
+ ASSERT_EQ("tel", TestFileIter->second);
// Check the type section.
TestFileIter = TestFile.GeneralGeographyList.find(0);
ASSERT_NE(TestFile.GeneralGeographyList.end(), TestFileIter);
- ASSERT_EQ("geo:3.5,3.5", TestFileIter->second);
+ ASSERT_EQ("3.5,3.5", TestFileIter->second);
// Check the ALTID section.
TestFileIter = TestFile.HomeGeographyList.find(1);
ASSERT_NE(TestFile.HomeGeographyList.end(), TestFileIter);
- ASSERT_EQ("geo:7.0,7.0", TestFileIter->second);
+ ASSERT_EQ("7.0,7.0", TestFileIter->second);
// Check the ALTID section.
TestFileIter = TestFile.BusinessGeographyList.find(2);
ASSERT_NE(TestFile.BusinessGeographyList.end(), TestFileIter);
- ASSERT_EQ("geo:14.0,14.0", TestFileIter->second);
+ ASSERT_EQ("14.0,14.0", TestFileIter->second);
// Check the ALTID section.
ASSERT_NE(TestFile.PicturesListPID.end(), TestFileIter);
ASSERT_EQ("71", TestFileIter->second);
+ // Check the TYPE section.
+
+ TestFileIter = TestFile.PicturesListType.find(0);
+ ASSERT_EQ(TestFile.PicturesListType.end(), TestFileIter);
+
// Check the MEDIATYPE section.
TestFileIter = TestFile.PicturesListMediatype.find(0);
ASSERT_NE(TestFile.PicturesListPID.end(), TestFileIter);
ASSERT_EQ("21", TestFileIter->second);
+ // Check the TYPE section.
+
+ TestFileIter = TestFile.PicturesListType.find(1);
+ ASSERT_NE(TestFile.PicturesListType.end(), TestFileIter);
+ ASSERT_EQ("home", TestFileIter->second);
+
// Check the MEDIATYPE section.
TestFileIter = TestFile.PicturesListMediatype.find(1);
ASSERT_NE(TestFile.PicturesListPID.end(), TestFileIter);
ASSERT_EQ("91", TestFileIter->second);
+ // Check the TYPE section.
+
+ TestFileIter = TestFile.PicturesListType.find(2);
+ ASSERT_NE(TestFile.PicturesListType.end(), TestFileIter);
+ ASSERT_EQ("work", TestFileIter->second);
+
// Check the MEDIATYPE section.
TestFileIter = TestFile.PicturesListMediatype.find(2);
ASSERT_NE(TestFile.LogosListPID.end(), TestFileIter);
ASSERT_EQ("71", TestFileIter->second);
+ // Check the TYPE section.
+
// Check the MEDIATYPE section.
TestFileIter = TestFile.LogosListMediatype.find(0);
TestFileIter = TestFile.LogosListPID.find(1);
ASSERT_NE(TestFile.LogosListPID.end(), TestFileIter);
ASSERT_EQ("21", TestFileIter->second);
+
+ // Check the TYPE section.
+
+ TestFileIter = TestFile.LogosListType.find(1);
+ ASSERT_NE(TestFile.LogosListType.end(), TestFileIter);
+ ASSERT_EQ("home", TestFileIter->second);
// Check the MEDIATYPE section.
ASSERT_NE(TestFile.LogosListPID.end(), TestFileIter);
ASSERT_EQ("91", TestFileIter->second);
+ // Check the TYPE section.
+
+ TestFileIter = TestFile.LogosListType.find(2);
+ ASSERT_NE(TestFile.LogosListType.end(), TestFileIter);
+ ASSERT_EQ("work", TestFileIter->second);
+
// Check the MEDIATYPE section.
TestFileIter = TestFile.LogosListMediatype.find(2);
ASSERT_NE(TestFile.XTokenListTokens.end(), TestFileIter);
ASSERT_EQ("FOODS;STATUS=FAVOURITE;TYPE=CHEESEANDONION", TestFileIter->second.ToStdString());
-}
-
-// TODO: Add tests for the Contact Loading process.
\ No newline at end of file
+}
\ No newline at end of file