#include "contacteditor/frmContactEditor.h"
#include "frmMain.h"
+#include "frmContact.h"
+#include "vcard/vcard.h"
#include "bitmaps.h"
#include "version.h"
#include "convert.h"
wxLocale locale;
locale.Init(wxLANGUAGE_DEFAULT, wxLOCALE_LOAD_DEFAULT);
-/*#if defined(__WIN32__)
-
- // Check that the minimum version of Xestia Common Components is installed on the system.
-
-#include <xestiaccdll.h>
-
- if (!CheckXCCVersion(1, 0, 0)){
- MessageBox(0, L"The version of Xestia Common Components installed is an older version not supported by this version of Xestia Address Book.\n\nPlease visit http://xestia.co.uk/commoncomponents and follow the page instructions to download the version required.", L"Older version of Xestia Common Components installed", MB_OK|MB_ICONSTOP);
- this->Exit();
- }
-
-#endif*/
-
static const wxCmdLineEntryDesc g_cmdLineDesc [] =
{
- { wxCMD_LINE_SWITCH, wxT_2("h"), wxT_2("help"), wxTRANSLATE("Displays help on command line parameters"),
+ { wxCMD_LINE_SWITCH, wxT_2("h"), wxT_2("help"), wxTRANSLATE(_("Displays help on command line parameters")),
wxCMD_LINE_VAL_NONE, wxCMD_LINE_OPTION_HELP },
- { wxCMD_LINE_OPTION, wxT_2("e"), wxT_2("edit"), wxTRANSLATE("Edit a vCard 4.0 formatted contact"),
+ { wxCMD_LINE_OPTION, wxT_2("e"), wxT_2("edit"), wxTRANSLATE(_("Edit a vCard 4.0 formatted contact")),
wxCMD_LINE_VAL_STRING, wxCMD_LINE_PARAM_OPTIONAL },
- { wxCMD_LINE_SWITCH, wxT_2("c"), wxT_2("convert"), wxTRANSLATE("Convert a contact file into another format."),
+ { wxCMD_LINE_SWITCH, wxT_2("c"), wxT_2("convert"), wxTRANSLATE(_("Convert a contact file into another format.")),
wxCMD_LINE_VAL_NONE, wxCMD_LINE_PARAM_OPTIONAL },
- { wxCMD_LINE_OPTION, wxT_2("ifmt"), NULL, wxTRANSLATE("Input format to convert from. (used with -c)"),
+ { wxCMD_LINE_OPTION, wxT_2("ifmt"), NULL, wxTRANSLATE(_("Input format to convert from. (used with -c)")),
+ wxCMD_LINE_VAL_STRING, wxCMD_LINE_PARAM_OPTIONAL },
+ { wxCMD_LINE_OPTION, wxT_2("ofmt"), NULL, wxTRANSLATE(_("Output format to convert to. (used with -c)")),
wxCMD_LINE_VAL_STRING, wxCMD_LINE_PARAM_OPTIONAL },
- { wxCMD_LINE_OPTION, wxT_2("ofmt"), NULL, wxTRANSLATE("Output format to convert to. (used with -c)"),
+ { wxCMD_LINE_OPTION, wxT_2("ifile"), NULL, wxTRANSLATE(_("Input filename to read from. (used with -c)")),
wxCMD_LINE_VAL_STRING, wxCMD_LINE_PARAM_OPTIONAL },
- { wxCMD_LINE_OPTION, wxT_2("ifile"), NULL, wxTRANSLATE("Input filename to read from. (used with -c)"),
+ { wxCMD_LINE_OPTION, wxT_2("ofile"), NULL, wxTRANSLATE(_("Output filename to write to (don't use to pipe to console). (used with -c)")),
wxCMD_LINE_VAL_STRING, wxCMD_LINE_PARAM_OPTIONAL },
- { wxCMD_LINE_OPTION, wxT_2("ofile"), NULL, wxTRANSLATE("Output filename to write to (don't use to pipe to console). (used with -c)"),
+ { wxCMD_LINE_OPTION, wxT_2("d"), wxT_2("display"), wxTRANSLATE(_("Display a contact in the contact information window.")),
wxCMD_LINE_VAL_STRING, wxCMD_LINE_PARAM_OPTIONAL },
- { wxCMD_LINE_SWITCH, wxT_2("s"), wxT_2("search"), wxTRANSLATE("Display the search window instead of starting normally"),
+ { wxCMD_LINE_SWITCH, wxT_2("s"), wxT_2("search"), wxTRANSLATE(_("Display the search window instead of starting normally")),
wxCMD_LINE_VAL_NONE, wxCMD_LINE_PARAM_OPTIONAL },
- { wxCMD_LINE_SWITCH, wxT_2("v"), wxT_2("version"), wxTRANSLATE("Displays version number"),
+ { wxCMD_LINE_SWITCH, wxT_2("v"), wxT_2("version"), wxTRANSLATE(_("Displays version number")),
wxCMD_LINE_VAL_NONE, wxCMD_LINE_PARAM_OPTIONAL },
{ wxCMD_LINE_NONE }
};
}
if (argc >= 7){
- wxPuts("Too many arguments given.");
+ wxPuts(_("Too many arguments given."));
exit(EXIT_FAILURE);
}
switch (ConvertRunStatus){
case CONVERTRESULT_UNITTESTFAIL:
- wxPuts("An internal unit testing failure has occured.");
+ wxPuts(_("An internal unit testing failure has occured."));
exit(EXIT_SUCCESS);
break;
case CONVERTRESULT_OK:
break;
case CONVERTRESULT_FORMATSSAME:
- wxPuts("Both input and output formats are the same.");
+ wxPuts(_("Both input and output formats are the same."));
exit(EXIT_FAILURE);
break;
case CONVERTRESULT_INVALIDINPUTFORMAT:
- wxPuts("Invalid input format given.");
+ wxPuts(_("Invalid input format given."));
exit(EXIT_FAILURE);
break;
case CONVERTRESULT_INVALIDOUTPUTFORMAT:
- wxPuts("Invalid output format given.");
+ wxPuts(_("Invalid output format given."));
exit(EXIT_FAILURE);
break;
case CONVERTRESULT_INPUTFILEMISSING:
- wxPuts("Input file with the filename given does not exist.");
+ wxPuts(_("Input file with the filename given does not exist."));
exit(EXIT_FAILURE);
break;
case CONVERTRESULT_INPUTFILEEMPTY:
- wxPuts("No input filename given.");
+ wxPuts(_("No input filename given."));
exit(EXIT_FAILURE);
break;
case CONVERTRESULT_INPUTFILEINVALIDFORMAT:
- wxPuts("Input file is in an invalid format.");
+ wxPuts(_("Input file is in an invalid format."));
exit(EXIT_FAILURE);
break;
case CONVERTRESULT_INPUTFILEERROR:
- wxPuts("An error occured whilst trying to open the input file location.");
+ wxPuts(_("An error occured whilst trying to open the input file location."));
exit(EXIT_FAILURE);
break;
case CONVERTRESULT_OUTPUTFILEERROR:
- wxPuts("An error occured whilst trying to open the output file location.");
+ wxPuts(_("An error occured whilst trying to open the output file location."));
exit(EXIT_FAILURE);
break;
}
wxIcon contacticon;
contacticon.CopyFromBitmap(contacticonbmp);
- // Get the filename of the selected contact.
+ // Setup the contact editor with the filename given.
frmContactEditor *ContactEditor = new frmContactEditor( NULL );
ContactEditor->SetupHeaders();
}
- /*if (!XABArgs.Found(wxT(""))){
+ if (XABArgs.Found(wxT("d"), &wxSContactFilename)){
+
+ // Check if the filename exists.
+
+ wxFileName contactfile(wxSContactFilename);
- return false;
+ if (!contactfile.FileExists()){
- }*/
+ wxMessageBox(_("The file with the filename given does not exist."), _("Error loading contact"), wxICON_ERROR);
+ return false;
+
+ }
+
+ // Check if file is in the user's Xestia Address Book data storage
+ // path. If it is, refuse to open it.
+
+ wxString UserDir = GetUserDir();
+ long UserDirLength = UserDir.Len();
+
+ if (UserDir == contactfile.GetFullPath().Mid(0, UserDirLength)){
+
+ wxMessageBox(_("The file with the filename given is in the directories that Xestia Address Book stores it's data and cannot be opened directly."), _("Error loading contact"), wxICON_ERROR);
+ return false;
+
+ }
+
+ wxMemoryInputStream istream(bigimgs_contactpersonicon48_png, sizeof(bigimgs_contactpersonicon48_png));
+ wxImage bigimgs_contactpersonicon48i(istream, wxBITMAP_TYPE_PNG);
+ wxBitmap contacticonbmp(bigimgs_contactpersonicon48i, -1);
+ wxIcon contacticon;
+ contacticon.CopyFromBitmap(contacticonbmp);
+
+ // Setup the contact information icons for later.
+
+ wxFileSystem::AddHandler(new wxMemoryFSHandler);
+ wxImage ciicon_png;
+
+ wxMemoryInputStream ciptostream(icons_cipto_png, sizeof(icons_cipto_png));
+ ciicon_png.LoadFile(ciptostream, wxBITMAP_TYPE_PNG);
+ wxMemoryFSHandler::AddFile(wxT("cipto.png"), ciicon_png, wxBITMAP_TYPE_PNG);
+
+ wxMemoryInputStream cilogstream(icons_cilog_png, sizeof(icons_cilog_png));
+ ciicon_png.LoadFile(cilogstream, wxBITMAP_TYPE_PNG);
+ wxMemoryFSHandler::AddFile(wxT("cilog.png"), ciicon_png, wxBITMAP_TYPE_PNG);
+
+ wxMemoryInputStream cisndstream(icons_cisnd_png, sizeof(icons_cisnd_png));
+ ciicon_png.LoadFile(cisndstream, wxBITMAP_TYPE_PNG);
+ wxMemoryFSHandler::AddFile(wxT("cisnd.png"), ciicon_png, wxBITMAP_TYPE_PNG);
+
+ wxMemoryInputStream cikeystream(icons_cikey_png, sizeof(icons_cikey_png));
+ ciicon_png.LoadFile(cikeystream, wxBITMAP_TYPE_PNG);
+ wxMemoryFSHandler::AddFile(wxT("cikey.png"), ciicon_png, wxBITMAP_TYPE_PNG);
+
+ wxMemoryInputStream civenstream(icons_civen_png, sizeof(icons_civen_png));
+ ciicon_png.LoadFile(civenstream, wxBITMAP_TYPE_PNG);
+ wxMemoryFSHandler::AddFile(wxT("civen.png"), ciicon_png, wxBITMAP_TYPE_PNG);
+
+ wxMemoryInputStream ciextstream(icons_ciext_png, sizeof(icons_ciext_png));
+ ciicon_png.LoadFile(ciextstream, wxBITMAP_TYPE_PNG);
+ wxMemoryFSHandler::AddFile(wxT("ciext.png"), ciicon_png, wxBITMAP_TYPE_PNG);
+
+ // Setup the contact information window.
+
+ frmContact *ContactWindow = new frmContact( NULL );
+
+ std::map<wxString, wxString> MemoryFileSystem;
+
+ vCard FileLoadData;
+ FileLoadData.LoadFile(wxSContactFilename);
+ ContactWindow->SetMode(true);
+ ContactWindow->SetUID(0);
+ ContactWindow->SetupPointers(&MemoryFileSystem);
+ ContactWindow->SetupContactData(&FileLoadData);
+ ContactWindow->Show(true);
+
+ SetTopWindow(ContactWindow);
+
+ return true;
+
+ }
// Setup default settings and accounts if they don't exist.
Home |
News |
Projects |
Releases
Bugs |
RFE |
Repositories |
Help
